Price: [price_with_discount]
Warning:
Please caution extremely when use the MS5902 in the gigantic circuit breaker ark. Don't use when voltage more than 120V/230V AC.You can turn on the flashlight in the dark surroundings.
Features:
-
Automatically and quickly finds correct breaker or fuse.
-
Quickly and easy identifies conditions of circuit socket.
-
MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC
-
Operating temperature: 0 ~ 50℃
Operation: Locating a Circuit Breaker or Fuse
-
Keep the pillar at left on the MS5902-T Plug the MS5902-T into the receptacle.if there is a candescent light fixture,please install a socket adapter before make sure the switch is OFF.then plug the MS5902-T into the socket adapter,turn the switch on at one time.(Socket adapter need purchase additional)
-
Go to the circuit breaker panel boxTurn the MS5902-R on,the red LED is light.
-
Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse.
-
Slide the chapiter of the MS5902-R down each breaker along both sides of the panel .Then the MS5902-R will beep frequently as it denote the relative signal strength.
-
Move the MS5902-R down each breaker once more. On the third pass, the MS5902-R will beep ,the red LED will quench and the green LED will light only at the circuit Breaker powering the MS5902-T.
-
Push the breaker off and check that the LED on the MS5902-T in the outlet is off to confirm you have found the correct breaker or buse.
Test Socket Keep the pillar at right on the MS5902-T.
Please contradistinguish nameplate on the MS5902-T.
Maintenance:
-
Keep clean with a dry cloth.
-
When the yellow LED is light on the MS5902-R, please unscrew and remove cover, insert new 9V battery so as to the MS5902-R is well-balanced.